WrapMaster, Inc. recommends the installation of the PermaWrap™ and WeldWrap™ Pipe Reinforcement Systems be made, ONLY by Certified Installers. There are three levels of certification available to the customer.
Level 1 Installer: Trained in the Field by WrapMaster Personnel or Certified Trainers. This level of training provides specific application technique and general product knowledge.
Level 2 Installer: 1-1/2 day course (classroom & hands-on) either at the Customer’s or WrapMaster’s Facility. This level of training provides application techniques for all scenarios and thorough product knowledge.
Trainer: 2 day course (classroom & hands-on) either at the Customer’s or WrapMaster’s Facility. This level of training provides application techniques for all scenarios, thorough product knowledge, use of engineering analysis software, etc. The individual will be fully qualified to train others to install the PermaWrap™ and WeldWrap™ Systems.
Re-certification is recommended annually, 12 months from the last certification date. Please review your Company Procedures and/or Operator Qualification requirements for specific re-certification intervals. In no case shall the re-certification interval exceed 36 months from the last certification date. Re-certification may be accomplished by a thorough review of the PermaWrap™ / WeldWrap™ installation procedures and successfully completing the written re-certification exam. We recommended the applicant use the PermaWrap™ Installation Manual during the examination. It is very important the applicant have a thorough knowledge and understanding of all the correct procedures necessary to apply the PermaWrap™ / WeldWrap™ composite reinforcement systems correctly and safely. If the applicant has any questions or does not understand a procedure, please consult your Certified Trainer or contact a WrapMaster representative for assistance. A minimum score of 80% is required in order to attain re-certification.
Instructions: (1) Download the Installation Manual and Certification / Re-certification Exam. (2) Read the instructions at the top of the Exam and fill-in the necessary applicant information requested. (3) Review the PermaWrap™ / WeldWrap™ documentation thoroughly and complete the exam. (4) Print the Certification / Re-certification Exam for your records. (5) Fax, mail or scan and email the completed examinations to the address below. (6) A WrapMaster representative will review the exam and update the Installer's Certification date in the WrapMaster database of Certified Installer's. Fax: (903) 643-8181 Email: info@wrapmaster.us
Level 1 Installer: Trained in the Field by WrapMaster Personnel or Certified Trainers. This level of training provides specific application technique and general product knowledge.
Level 2 Installer: 1-1/2 day course (classroom & hands-on) either at the Customer’s or WrapMaster’s Facility. This level of training provides application techniques for all scenarios and thorough product knowledge.
Trainer: 2 day course (classroom & hands-on) either at the Customer’s or WrapMaster’s Facility. This level of training provides application techniques for all scenarios, thorough product knowledge, use of engineering analysis software, etc. The individual will be fully qualified to train others to install the PermaWrap™ and WeldWrap™ Systems.
Re-certification is recommended annually, 12 months from the last certification date. Please review your Company Procedures and/or Operator Qualification requirements for specific re-certification intervals. In no case shall the re-certification interval exceed 36 months from the last certification date. Re-certification may be accomplished by a thorough review of the PermaWrap™ / WeldWrap™ installation procedures and successfully completing the written re-certification exam. We recommended the applicant use the PermaWrap™ Installation Manual during the examination. It is very important the applicant have a thorough knowledge and understanding of all the correct procedures necessary to apply the PermaWrap™ / WeldWrap™ composite reinforcement systems correctly and safely. If the applicant has any questions or does not understand a procedure, please consult your Certified Trainer or contact a WrapMaster representative for assistance. A minimum score of 80% is required in order to attain re-certification.
Instructions: (1) Download the Installation Manual and Certification / Re-certification Exam. (2) Read the instructions at the top of the Exam and fill-in the necessary applicant information requested. (3) Review the PermaWrap™ / WeldWrap™ documentation thoroughly and complete the exam. (4) Print the Certification / Re-certification Exam for your records. (5) Fax, mail or scan and email the completed examinations to the address below. (6) A WrapMaster representative will review the exam and update the Installer's Certification date in the WrapMaster database of Certified Installer's. Fax: (903) 643-8181 Email: info@wrapmaster.us
Manual
Exam
Training
INITIAL CERTIFICATION
RE-CERTIFICATION
Revised 01/30/2010 WrapMaster, Inc.
© 2000-2010 All rights reserved. Reproduction in whole or in part is strictly prohibited without the expressed written permission of WrapMaster, Inc.
© 2000-2010 All rights reserved. Reproduction in whole or in part is strictly prohibited without the expressed written permission of WrapMaster, Inc.
Manual
Exam
En Espanol
En Espanol
Composite solutions
for Pipelines and Structures
for Pipelines and Structures